Search
Filters
Close

TechLiner FAQs

The Ti2 TechLiner is Patent Pending

The Ti2 TechLiner was designed to host a 2 different Refills.  As of January 2016 all TechLiners are shipping with the UniBall™ .7mm Jetstream Refill.  Prior to 1/2016 Techliners were shipped with UniBall™ Signo refills (either .5mm or .7mm).  

***PLEASE NOTE***  Each Refill takes a specific setup.  The set ups are not interchangeable with refills.  Set ups are interchangeble with the TechLiners.  Meaning all TechLiners can accept different refills, you just need a set up specific to the refill.

 

Which Refill Do I have?

JetStream

JetStream Refill 

UniBall™ Jetstream Refills have the part# SXR-7 stamped on it.  The last number "7" in the part# refers to the tip size.  In this instance "7" = .7mm.  This is the Refill currently shipping with all TechLiner Pens.  All sizes (SXR-3, SXR-5, SXR-7, SXR-10) work with this set up.

 

Signo

Signo Refill

UniBall™ Signo Refills have the part# UMR-85N stamped on it.  The last number "5" in the part# refers to the tip size.  In this instance "5" = .5mm.   All sizes (UMR-81N, UMR-83N, UMR-85N, UMR-87N) work with this set up.

 

TechLiner JetStream Refill Assembly (regular length 5.75")

JetStream Internal Parts breakdown.  TechLiners with the Jetstream refill come with 6 internal parts.

TechLiner JetStream Setup

Parts List

1.  Jetstream ring magnet*

2.  Jetstream O-ring

3.  Jetstream front ring spacer

4.  Jetstream refill

5.  Jetstream tail spacer (***regular length versions only)

6.  Tail magnet* (same for JetStream and Signo)

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.  

 

TechLiner JetStream Refill Assembly (Shorty length 5")

JetStream Internal Parts breakdown.  TechLiners with the Jetstream refill come with 6 internal parts.

Parts List

1.  Jetstream ring magnet*

2.  Jetstream O-ring

3.  Jetstream front ring spacer

4.  Jetstream refill

5.  Jetstream shorty tail washer (***shorty length versions only) (**** only used with a clip installed)

6.  Tail magnet* (same for JetStream and Signo)

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel. 

 

TechLiner Signo Refill Assembly (regular length 5.75")

 Signo refill set up

Parts List

1.  Signo ring magnet*

2.  Signo wave washer x2

3.  Signo refill

4.  Signo tail spacer (***regular length versions only)

5.  Tail magnet* (same for JetStream and Signo)  

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.  

 

TechLiner Signo Refill Assembly (shorty length 5")

 

Parts List

1.  Signo ring magnet*

2.  Signo wave washer x2

3.  Signo refill

4.  Signo shorty tail washer (***shorty length versions only) (**** only used with a clip installed)

5.  Tail magnet* (same for JetStream and Signo)  

*Magnets are directional.  Inserting them reversed will cause the magnetic cap to repel.